Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Friday, May 24, 2013

Flats Challenge- Day 5

It's day 5 of the Flats & Handwashing Challenge hosted by Dirty Diaper Laundry.

"This event aims to bring awareness and educate cloth diapering families and beyond about the benefits and feasibility of using flat cloth diapers, the most basic of all diapers, and handwashing. Why? Because there are families who struggle everyday with diaper need. There are no federal or state funded assistance programs to help families buy diapers. This can result in babies being left in diapers too long or families reusing disposable diapers; both options pose serious health risks for the baby. My goal has always been to prove that, when necessary, a small number of flat cloth diapers, covers, and a simple bucket washer or tub can be all a family needs to provide clean and sanitary diapers."

--Kim Rosas of Dirty Diaper Laundry


So today's prompt is what's working. For me the answer is everything. I use flats fairly regularly and discovered a long time ago that the kite & origami are the best folds for us. When I need extra absorbency I add a pad folded flat in the kite. A kite + a pad fold under wool gets us through the night with no leaks. I'm enjoying hand washing since it gets me out of the house and into the sun for at least 20 minutes a day. I'm considering selling off some of my pockets & prefolds.

Prepping our nighttime diaper.





Saturday, January 28, 2012

Homemade heart shaped pizza pockets.

So confession, I love Hot/Lean Pockets. I know they are terrible for you but they taste so yummy and are so fun to eat. (Yes, I'm kind of like a 5 year old sometimes.)

Tonight was leftover night and we just happen to have all the fixings for pizza but, I was in the mood for something fancier. Hmm... I know! Pizza pockets! However, circles & squares are boring but hearts, now that's fancy!

Here's a quick little tutorial on how to make your own. 




1. Roll out dough 1/2 inch thick, use a cookie cutter to cut out dough, roll remaining dough out 1/4 inch thick. Roll out 1/2" thick shape to make it about 1.5 times the size of the cookie cutter. Roll out 1/4" thick piece to make slightly bigger than cookie cutter.
2. Turn cookie cutter with thicker edge facing up and lay larger piece of dough over the top.
3. Push dough down into cookie cutter making sure to leave dough up and over the edge of cookie cutter.
4. Fill dough with yummy toppings.
5. Wet the edge of dough with water & place the other piece of dough on top.
6. Press down on edges to seal. Flip over and remove cookie cutter. Use a fork to firmly seal the edges. Poke a few holes in the top to allow stream to escape.
7. Bake at 425F on a parchment paper covered cookie sheet on middle rack for about 10 minutes.
8. Enjoy! (Pictured: Feta, chicken, green onion, spinach, ranch & mozzarella.)

And in case you want to see exactly how I do it, I even made you a video! (I feel so special right now!) Hope you make some of your own and wow your family!


 

And about the headboard, I kind of spaced on taking pictures & took a nap instead. Whoops. So pics tomorrow I promise.

Friday, July 8, 2011

Peek-a-boo skirt tutorial

Because Stef asked for it. ^-^
Supplies
fabric for overskirt- Width= your kid's waist measurement x 2, Length=measure from hip to knee
fabric for underskirt- Width= same as overskirt, Length= 3 inches longer than overskirt
ribbon casing- Width= 2 inches, Length= same as overskirt
ribbon-2 pieces, 2 inches long than length of overskirt
1/2 inch wide elastic- 1 inch smaller than waist measurement
1) Serge or zig zag both long sides and one short of the ribbon casing.
 2)Iron, pin and sew a 1/2 inch rolled hem for both under and overskirt.
 3) Measure 4 inches over from the middle of the overskirt, line up serged bottom of casing with hemmed edge and pin.
 4)Sew from top to bottom (or bottom to top) 1/4 inch from the edge on both sides of the casing. Trim top of casing even with overskirt. Stitch down the center of the casing. (don't worry if it's not perfectly straight but try to keep it pretty even)
 5) Feed ribbons through casing.
 6)Pin ribbons in place.
 7) Zig Zag stitch ribbons in place. (I went over it several time because I know my kiddos are rough and didn't want them pulling the ribbons out.)
 8) Fold back top edge of overskirt 1/2 inch and iron. Line up bottom edge of overskirt with the stitches of hem of the underskirt. Pin top edge of overskirt to the underskirt and top stitch in place.
 9) Your skirt should look very close to this if I don't completely suck at giving directions.
 10) Fold skirt in half width wise and line up bottom edges. Make sure both the over and under skirts are smoothed out. Pin, sew and serge. You should have an almost completed skirt.
 11)Time to make a waistband casing. Fold over top edge 1/2 inch and press. Now fold it over 3/4 inch, press, pin & sew leaving an opening to feed elastic through. Feed elastic through, zig zag elastic ends together. Stitch close opening.
                                                       Sorry, I forgot to take a picture.
 12) Put on cute little girl. Tie ribbons so overskirt is all scrunched up and adorable. Admire your work, if little model will hold still.

Wednesday, November 10, 2010

Ugly Lamp Redo

I have some hideous lamps. They were wedding gifts. We did a low key thing and didn't invite anyone to the ceremony. We just threw a reception a few weeks later. So we didn't do the whole gift registry thing. So I wound up with the these babies.
Ugh. Well the hubby's shade was starting to fall apart. So I decided it was time to redo it. I had a bunch of this fabric left over from a skirt I made. For some reason the pattern package thought I'd need 2 3/4 yards. I used 1 yard. ???? I don't know where I went wrong.

So I started by pulling the inside trim off the top and bottom (the bottom piece was already hanging half off, which is what prompted me to do this project.) Here is my little helper checking it out.
Then I forgot to take a picture of how I used a box cutter to remove the ugly plastic outer cover. I cut the seams and traced the old piece on to my fabric.
I cut out the pieces and pinned them right sides together.
Then I slipped the cover over the lamp shade and used mini binder clips to secure it in place.

I clipped around the bottom then top pulling fabric tight. I was glad I checked before I sewed because I ended up re-pinning my seams, looser on the bottom & tighter on the top.
When I was happy with how the shade fit, I removed the clips from around the top and bottom of the shade and stitched the seams.


I turned the cover right side out & clipped it back on to the shade.

Then I snipped the fabric to fit around the little divider things.

I hot glued around the bottom of the shade pulling the fabric tight.

Press firmly to secure.

Next I trimmed away excess fabric and reattached the trim .Same thing for the top.
(Here my sweet baby is returning the clip she just pulled off the bottom of the shade.)

Ta-da! I love it!
Much better right?

I originally thought to spray paint the base white, but I really think I like it black.

LinkWithin

Related Posts Plugin for WordPress, Blogger...